Steel Grating

HOMEEMAILCONTACT US
Galvanized Steel Grating
Bar Type Grating
Stainless Steel Grating
Anti-slip Steel Grating
Compound Steel Grating
Cross Steel Grating
Steel Grating Fence
T Type Steel Grating
Serrated Steel Grating
Stair Tread

Anping County jintai Metal Product Co.,Ltd.
Add:Wire Mesh Industrial District Anping County ,Hebei ,China
Tel:+86-318-7793339
Fax:+86-318-7793338
E-mail:
sales@jtsteelgrating.com
sales1@jtsteelgrating.com
sales2@jtsteelgrating.com
sales3@jtsteelgrating.com
sales4@jtsteelgrating.com



Steel Grating Accessories Your Position : Steel grating > Steel Grating Accessories

Bar Grating Clips & Fasteners

* G Clips

G clips fastens grating to a horizontal-facing steel structural member edge. The model GG- describes an assembly of fastener parts identical but for materials of construction, that each contain three common parts. First is a G-clips unique top for better holding strength and to suit 19W4 grating. Second, a G-clips patented bottom connects to the beam underside. A hex-headed cap screw connects the two, and its length suits the grating height being installed.

* Grate Fast Clips

The Type GF grate-fast fastener enables rapid and secure connection of open grate flooring to steel sections. Grating can be connected by one man only, working from above, without the need to drill the steel, or weld on site. The standard product consists of a pre-assembled ‘top-hat’ bracket, socket head cap screw and body casting and provides the additional benefit of increased clamping force over lower quality clips. For specific applications, it can be supplied with an off-set top-hat bracket to accommodate non-standard grating bars.

 

 

* Channel Frame

A special C-channel frame fastener system used in conjunction with welded anchor blocks between bearing bars. The fabricated frame is held in place by TEK screws that are attached to the anchor blocks. Recommended spacing is between 12" and 16" O.C."

 

 

* Saddle Clips

The saddle clip bridges two bearing bars and is attached with 1/4" self-tapping bolt, 1/4" self threader, 1/4" weld stud or 1/4" bolt and nut when hole is drilled through supporting flange. Available for 15/16", 1-3/16" and 1-3/8" bearing bar spacings (15, 19 and 22 space) in carbon and stainless steel. Fasteners should be specified separate from clips. (Fasteners available in self tapping, or bolts with nuts and washers included)

Chinese German Spanish French Italian Portuguese Japanese Korean Arabic Russian
  Tel:+86-318-7793339 Fax:+86-318-7793338 E-mail:sales@jtsteelgrating.comsales1@jtsteelgrating.comsales2@jtsteelgrating.com
sales3@jtsteelgrating.comsales4@jtsteelgrating.comDesigned By :[Rongchuangmedia]